1. I recently purchased a Goerz Series III, No 3 210 mm lens in barrell. The numbers that are engraved on the side of the barrel seem a little different from any that I have seen. They are: 4.6, 6, 12, 24, 48, 96, 192, 384.
2. This is an interesting Goerz binocular, serial number 501251. The prisms have a little fungus or dirt to the left hand side and a minute chip to the very edge of the right side prism, completely outside of the field of view. The collimation is out and the eyecups are chipped. Goerz Berlin Armee Trieder 1908 D.R.P Binoculars.

I recently acquired a lens that is labelled: 'GOERZ DAGOR F:6.8 FOCUS 9 1/2 IN. No.222689' Can anyone identify what type of Dagor it might be and when it was produced? I've looked all over the WWW and can only find a 222*** Goerz series that appears far too old for this particular lens. The lens is coated but not multicoated and there is no country of origin marking on the lens it is in an Alphax shutter. It belonged to a photography professor in Rochester and it seems like a pretty nice piece of glass. The shutter would not be the orig.

Sanders is right: This lens is far too old for original coating and dates from anywhere between ~1906 and 1910; the shutter is at least 20yrs younger, likely a 1940s model. Re: 'What type of Dagor'?Just the 'normal' one., i.e. , or 'Gold-Dot,'.: This 72 degree Dagor (90 degrees at f 32) was sold as a 6.5x8.5' lens (wide open) which was however supposed to be able to cover 11x14' (!) at f 32.(Goerz 1913 catalogue). So, as a collectors item it ain't worth much, but that doesn't mean it can't be used to take nice pictures, which is also dependent on the shutter re-mount job, as cell spacing was critical with dagors. Thanks Thanks Everyone for your kind responses. I tend to agree with Phitz that this lens is likely from the 1950s and not the earlier part of the century. If B&J used their own serials, this might explain the variance and confusion.

But note in the picture below that the serial number is the same engraved on the barrel and on the cells. So f6,8 or 1:6,8 is the lager aperture for this lens. The following figures, even in this Goerz scale, are very close to the regular series of f stops. The next 3 pictures are from the Photo Club de Paris magazine in 1899. Part of the serial number sequence of lenses made by Ross.Note that the source warns that 'anomalies' exist, and suggests that some lenses, either made by Ross from designs of other companies (such as Zeiss and Goerz), or lenses made for Ross by subcontractors, may have their own serial numbers unrelated to these.

The Holmes, Booth & Haydens lens above, is also marked 'Patented June 7th, 1859.' 'The Lens is almost 22' long including the shade. While on the subject of 'diffusion' or 'depth 'of focus it may be remarked that a delusion on this point is cherished by a vast number of photographers. For this the. On Goerz Serial numbers and dates. (former Goerz Tech.) Lens # 35 1902-1903 170 1903-1905 267 1906-1908 230 1908-1909 334 1911 -1914. Date of CP Goerz Double Anastigmatic (Dagor) Lens. Goerz Optics I. Introduction II. In 1942 the Goerz lenses. “Estimated numbers of serial production of binoculars of Optische Anstalt C.P.GOERZ - Berlin Serial. Goerz Optics I. Introduction II. In 1942 the Goerz lenses. “Estimated numbers of serial production of binoculars of Optische Anstalt C.P.GOERZ - Berlin Serial. Based in Berlin, Germany, C. Goerz was a manufacturer of lenses and cameras beginning in 1888. (see here for dating these serial numbers).

This is certainly not a 90 year old lens. Recently, when I had the lens CLA'd they advised that the coating is beginning to degrade slightly. I'm sure this is an after-production coating either from B&J when remarketing or from Goerz. Fbi 4600 Dl Installation Manual. The lens will be used for 8 x 10 black and white mostly and I plan to get to know it well once my bellows returns from Western Bellows. Turbofloorplan 3d home and landscape pro 14.1 keygen key. Thanks again.

Click to expand.It's definitely not one of the infamous B&J 'Berlin Dagors'. Those lenses were assembled using old, loose, and often poorly matched, elements of dubious quality. They were sold by B&J as new 'Berlin Dagors' and did not contain the word 'Goerz' anywhere on the lens. If they would have, they would have been sued to high heaven by C.P. Lenses made in Germany prior to the German Goerz being absobed by Zeiss-Ikon (ca.

1926) are labeled: 'C.P. GOERZ BERLIN'. Lenses made in Germany after the Zeiss merger are labeled: 'Carl Zeiss Jena' and 'Goerz-Dagor'.

If this is your first visit, welcome! Please read our.This will give you the info you need to get started flying and usingthis web site.Welcome MSFS Users!If you are here because of the new Microsoft Flight Simulator there aretwo places you will want to visit:- where we collect all MSFS news, articles, etc.- where you can ask questions and talk about the sim. Until you register you can read any of the articles onthis page and also read messages in the forums.Need help getting started? Please note that you will need toto use many of the site's best features, including downloading files andposting messages.

Lenses made by the American Goerz company were engraved with a number of different designations over the years. The lens shown above is definitely a pre-WWII US made Dagor. The simple 'GOERZ DAGOR' was the engraving style they used at that time.

Later, possibly post-WWII, perhaps a little earlier (I'd have to comb though old catalogs to nail down a date), they switched to labeling their lenses 'C.P. GOERZ AM.OPT.CO'. This designation remained until around 1963 or 1964 when they changed the company name and labeling to read' 'GOERZ OPTICAL CO. And then there were the later Kern made Dagors during the Kollmorgen (early 1970s) and Schneider (1970s and early 1980s) years. Those are easy to tell as they are all labeled 'Lens made in Switzerland'. There may have been other permutations, especially in the very early years of the American Goerz company, but those are the main ones I know of off the top of my head. As I stated above, any Dagors assembled from loose elements by Burke and James are labeled as 'BERLIN DAGOR' absent the word Goerz.

Goerz Lens Serial Numbers

The specific lens pictured in this thread is definitely decades older than the shutter it is presently mounted in. As others have stated, the shutter is not original. It's definitely a remount. Also, the date of manufacture of the lens pre-dates commercially viable coating technology by many years. So, if it is coated (it doesn't look like it is in the attached photo, but it's impossible to tell for sure form a small jpeg image), it was coated years later - possibly at the same time the lens was mounted in the shutter.

If it was retrocoated, the coating (and shutter mounting for that matter) may have been done by B&J. It may have been done by C.P. Goerz AM Optical, or maybe someone else. I have seen genuine Goerz lenses that were retrocoated by B&J.

I've even seen one in a box that contained a little slip of paper stating that it had been coated by Burke and James. Although coating reduces flare and increases contrast, uncoated Dagors are perfectly usable. The Dagor is a cemented design. So, it only has four air:glass interfaces (compared to an Artar or WF Ektar that have eight air:glass interfaces and benefit much more from coating). Click to expand.Ian, Thanks for the info. That date, right around the beginning if WWII seems about right for when the American Goerz started labeling things 'C.P. Stood for American.

The original C.P. Download Detective Conan Movie 13 The Raven Chaser Sub Indonesia here. Goerz was obviously a German company, and Goerz is a very German sounding name. So, here in the states, at that particular time in history, it would have been very wise from a marketing standpoint to make sure your potential customers knew you were an American company and proud of it. I also have what appears to be a pre WWII GoerZ Am. Optical Dagor, that is coated.

Goerz Lens Serial Numbers 222

The inscription on mine reads Goerz Dagor, F:6.8, Focus 12 in., No. Mine is in an early Acme shutter. Any idea when this lens was made? There is a big gap in the listed Goerz serial numbers between 320000 (1918) and 751240 (1927). And if Burke & James were coating older Goerz Dagors.

How would they have done the actual coating? Coated the existing cells as they were, or de-cemented the cells, coated the outside elements and re-cemented the three elements in each cell?